The Yokogawa EJA110E high-performance differential pressure transmitter supports multiple industrial communication protocols, including HART, FOUNDATION Fieldbus, and PROFIBUS. Built on single-crystal silicon resonant sensor technology, it converts differential pressure into a standard 4–20mA DC signal while enabling real-time data exchange with control systems. This makes it a strong fit for flow, level, density, and pressure measurement across petrochemical, power, and process industries. Its communication flexibility is one of the main reasons engineers and procurement teams consistently choose this device for both new installations and upgrades.
The EJA110E uses DPharp digital sensor technology, which has single-crystal silicon elements that vibrate at frequencies that are related to the pressure that is being applied. With a reference accuracy of ±0.055% and a response time of 90 milliseconds, this method gives very stable readings. The transmitter sends out a 4–20mA signal and checks the static pressure at the same time, giving operators two process variables in one device. This ability to switch between two variables makes wiring easier and lowers the cost of installation in most plant settings.
The emitter works with the PROFIBUS, HART, and FOUNDATION Fieldbus standards for transmission. The existing 4–20mA loop can be used for two-way digital communication with HART. This means that engineers can do configuration and diagnostics from afar, without having to go to the field. BASE FORMAT Fieldbus makes fully digital, multi-drop wiring possible, which cuts down on the number of cable runs needed in big buildings. For plants that already use Siemens or a similar automation system, PROFIBUS works well. Distributed control systems (DCS) and SCADA tools work well with all of the options.
The accuracy of measurements over time depends on how well contact is set up during installation. Since the output type is set at the plant, engineers should check the protocol choices before commissioning. Noise interference can be avoided by properly grounding and shielding signal cables. This is especially important in places with a lot of heavy electrical equipment. The device stays within its ±0.1% URL stability standard for its 10-year service life thanks to regular checks on terminal links and zero-point verification.
The Rosemount 3051 is a popular DP Yokogawa EJA110E high-performance differential pressure transmitter that works well with HART and has a large installed base. The EJA110E is just as flexible with protocols, but it has a stricter long-term stability specification of ±0.1% URL over 10 years, compared to ±0.1% every five years for the 3051. In situations where the cost of maintenance is affected by how often the device needs to be calibrated, the EJA110E's longer stability window saves money over the device's lifetime.
The EJA120E is part of Yokogawa's own product line and is designed for uses that need a higher static pressure rating, like high-pressure pipeline situations. With a 100:1 turndown ratio, the EJA110E can measure a wider range of values, making it more useful in a wider range of process settings. Both models use the same DPharp sensor platform, which makes it easier to find spare parts and get technicians who are familiar with both models to work together.
When purchasing teams look at DP transmitters, they should consider more than just the price. Because the EJA110E has both SIL2 (single unit) and SIL3 (redundant configuration) certifications from TÜV Rheinland and EXIDA, it can often be used instead of a separate safety instrument, which lowers the total cost of installation. With a 10-year stable guarantee and double sealing that meets ANSI/ISA 12.27.01 standards, the device gives a good return over the whole duration of the plant.
In the process industries, HART is still the most common digital communication standard. Technicians can use a handheld communicator or asset management software to read secondary variables, run diagnostics, and change configuration parameters from a distance with the EJA110E's HART output. The unique Back-Check self-diagnosis function does calculations backward in real time, making sure of the quality of the measurements without stopping the process. This cuts down on shutdowns that aren't needed and helps maintenance teams find sensor drift before it hurts the quality of the product.
BEGINNING Fieldbus changes the emitter into a live node on a digital bus, so it can do control tasks locally and send a lot of diagnostic information to the DCS. This works well for facilities that want to go digital or integrate Industry 4.0. In companies that use that design, PROFIBUS PA offers the same benefits. Both protocols help predictive maintenance workflows by sending process data along with information about the health of devices. This cuts down on unplanned downtime in areas that are important for production.
More and more, field instruments are being linked to cloud-based analytics platforms in process plants. The digital communication choices on the EJA110E give these devices the structured data output they need. Frequency-based sensor signals from the DPharp element can show early signs of diaphragm wear or process buildup, which helps algorithms check for problems before they happen. This puts the Yokogawa EJA110E high-performance differential pressure transmitter in a good position for buildings that want to improve their automation in stages instead of replacing the whole system at once.
If you buy from an official Yokogawa dealer, you can be sure that the guarantee will cover all of your purchases. Shaanxi Honglixing Electronic Technology Co., Ltd. (HLX) is a company that is allowed to sell Yokogawa instruments and other foreign brands like Emerson Rosemount, Siemens, ABB, and Honeywell. When people buy through HLX, they can access verified inventory, manufacturer documentation, and technical pre-sales support. These are all important things to know when choosing instruments for applications that need to be safe or for custody transfer.
Standard EJA110E versions can usually be ordered more quickly from approved dealers who keep stock in their own regions. When you buy in bulk, HLX can discuss prices and set up delivery times that work with your project's plan. Before making an order, buyers should make sure they have the correct model code, which includes the process link, output type, and any extra features that are desired. This will help avoid specification mistakes that cause delays. Based on process data sheets, HLX's expert team can help you choose the right model code.
All of the EJA110E units that HLX sells come with full Yokogawa manufacturer warranties. The HLX expert engineering and after-sales teams have worked in the field for more than ten years and can help with installation, testing, and fixing problems in the field. During the warranty period, products are fixed or replaced if they break. Devices are carefully packed in industry-standard boxes to keep them safe during shipping, and there are several delivery choices to fit project plans.
The EJA110E stays within its accuracy range thanks to regular zero-point verification and span calibration. Calibration of HART-enabled units can often be done virtually, which saves hours of work in the field. Yokogawa releases firmware updates for the transmitter on a regular basis. These updates can only be applied through authorized service channels and keep the device compatible with new DCS and asset management platforms.
Most of the time, HART communication errors are caused by signal noise, wrong loop resistance, and bad grounding. Most problems with connecting a handheld communicator can be fixed by making sure the loop resistance for HART is between 250 and 1100 ohms and checking the continuity of the cable shielding. When installing Fieldbus, the main diagnostic checks are the placement of the network terminator and the loading of the segments. When users can't be at the office, HLX's technical support team can walk them through these steps online.
Independent studies in process automation show that over a five-year period, upkeep labor costs are cut by 15–25% for tools with longer recalibration intervals and built-in diagnostics. This result is directly supported by the EJA110E's 10-year stability standard and its ability to continuously check itself through DPharp. Its functional safety certifications (IEC 61508:2010 and IEC 61511:2004) also lower the costs of insurance and compliance in industries that have to follow rules.
The Yokogawa EJA110E high-performance differential pressure transmitter can communicate with HART, FOUNDATION Fieldbus, and PROFIBUS, which makes it a good choice for process plants at any level of automation maturity. Engineers and buyers are both very happy with how accurate it is, how stable it stays over time, and how safe it is. When people buy from an official seller like HLX, they get real goods, quick technical help, and dependable service after the sale that protects their investment for as long as the device works.
The EJA110E works with the PROFIBUS, HART, and FOUNDATION Fieldbus standards. Since the output type is set up at the plant, buyers must indicate the protocol they need when they place their order. For companies that already have 4–20mA infrastructure, HART is the most popular choice.
Only buy from Yokogawa distributors who are authorized to do so. Real units come with Yokogawa paperwork, model plates, and registration for the warranty. Since HLX is a registered distributor, they can confirm the goods if you ask them to.
The main maintenance tasks are to calibrate the zero point, check the cable shielding, and confirm the loop resistance on a regular basis. The segment end and device address settings for Fieldbus units should be checked once a year or whenever the network changes.
Yes. It sends organized data through digital communication that is used by systems for managing assets and checking their conditions. The FOUNDATION Fieldbus and PROFIBUS options work best for plants that are moving toward connected plant architectures.
Yes, SIL2 requirements are met by single units, and SIL3 requirements are met by multiple setups. IEC 61508:2010 and IEC 61511:2004 state that these ratings are valid. TÜV Rheinland and EXIDA have both given their agreement.
The Yokogawa EJA110E high-performance differential pressure transmitter is for sale at HLX. It comes with a full manufacturer guarantee, fast shipping, and dedicated expert support. HLX is a registered distributor with more than ten years of experience in the power, petrochemical, and oil industries. They offer full help from design to completion. Email our team at sales01@hlx8.com to get a price or talk about your application needs.
1. Yokogawa Electric Corporation. EJA110E Differential Pressure Transmitter User's Manual. Yokogawa Electric Corporation, 2021.
2. International Electrotechnical Commission. IEC 61508: Functional Safety of E/E/PE Safety-related Systems. IEC, 2010.
3. International Electrotechnical Commission. IEC 61511: Functional Safety — Safety Instrumented Systems for the Process Industry Sector. IEC, 2004.
4. FieldComm Group. HART Communication Protocol Specification, Revision 7.6. FieldComm Group, 2020.
5. ISA — International Society of Automation. ANSI/ISA-12.27.01: Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids. ISA, 2011.
6. Blevins, T., Nixon, M., & Wojsznis, W. Control Loop Foundation: Batch and Continuous Processes. ISA, 2012.
Our customers’ satisfaction speaks for our quality — contact us to experience the same reliable service.