When OEM engineers need a pressure measurement device that performs reliably across demanding industrial environments, the Rosemount 2051CD differential pressure transmitter stands out as a proven solution. Engineered by Emerson, this transmitter delivers ±0.05% of span accuracy, supports multiple communication protocols including HART® and WirelessHART®, and carries SIL 2/3 safety certification under IEC 61508. Its coaxial design enables flexible, direct-mount installation for flow and level applications alike. Whether you operate in oil and gas, power generation, or chemical processing, this device provides the measurement integrity your process demands.
A coaxial sensing architecture in the Rosemount 2051CD differential pressure transmitter cuts down on the need for impulse lines and the size of the installation area. Up to 2000 psi (137.9 bar) of differential pressure can be measured, and the same range can be used for gauge pressure measurement. The device stays accurate to within ±0.05% of its span over a rangeability window of 100:1. This means that you can change how the same unit is set up for different process conditions without affecting the quality of the measurements.
Wetted materials in the transmitter are made of 316L stainless steel, Alloy C-276, and tantalum. Each of these is good for a different amount of process media aggression. 4-20 mA HART®, WirelessHART®, FOUNDATION™ Fieldbus, PROFIBUS®, and 1-5 V Low Power HART® are all ways to communicate. NSF, NACE®, and hazardous area approvals are some of the other certifications that make it legal in a wide range of settings. The built-in configuration buttons on the integrated local operator interface make it possible to calibrate in the field without using any extra tools. This makes commissioning much faster.
It's also easier to fix problems with the local display and menu-driven interface. On the gadget itself, engineers can check the output signals, look at the diagnostic codes, and change the damping settings. This feature makes it less necessary to use extra mobile communicators during the initial setup process, which is helpful when time is of the essence for a project.
It's not enough to just drop a transmitter into a panel to be an OEM. To complete the process, you need to make sure that the device's physical, electrical, and communication features are right for your purpose. The rosemount 2051CD differential pressure transmitter's design allows for a lot of different customization choices. Knowing these options ahead of time saves a lot of work later on.
How well the transmitter talks to your control system depends on which protocol you choose. For companies that already have 4-20 mA wiring, HART® is the best choice. FOUNDATION™ Fieldbus, on the other hand, works well with digital bus topologies that are popular in petrochemical and refinery automation. When used in separate factory settings, PROFIBUS® works well. WirelessHART® gets rid of all wiring restrictions, so it can be quickly set up in rural tank farms or offshore sites where running cables would be too expensive. Picking the right protocol during the procurement stage saves a lot of money on later upgrades.
Long-term dependability in corrosive or high-temperature processes depends on the choice of material. Alloy C-276 is more resistant to rust than regular stainless steel when used in places with chlorinated chemicals or seawater. Tantalum works well with acids that are very strong. The way the parts are mounted is also important. The coaxial design lets you connect directly to the main flow elements, diaphragm seal systems, and manifold valves. This cuts down on the number of process connections and the chance of leaks, which is a big safety plus for sites in dangerous areas.
These customization layers, which include choosing the protocol and the materials, let procurement teams build a device configuration that works for the job instead of making the process fit a standard instrument.
A lot of the time, procurement managers compare the Rosemount 2051CD differential pressure transmitter to the Rosemount 3051CD and other types from Yokogawa and Honeywell. Each has its own benefits, but the best one for your application will depend on how accurate it needs to be, your budget, and how complicated your system is.
With the high-accuracy choice, the Rosemount 3051CD can measure spans with an accuracy of ±0.025% and has a 150:1 range-down capability. This makes it suitable for situations where measurement accuracy is important and the budget allows for the extra. With an accuracy of ±0.05% and a rangeability of 100:1, the Rosemount 2051CD differential pressure transmitter can handle most standard process applications at a more reasonable price. That difference in cost over hundreds of units is important for OEMs that put a lot of receivers into skid-mounted systems.
The levels of accuracy for Yokogawa's EJX110A and Honeywell's STD800 series are about the same, but their ecosystem integration, availability of spare parts, and after-sales support networks in some areas are not the same. Procurement teams are more confident in lifecycle management because Emerson has a global service system and a lot of technical documents for the Rosemount 2051CD differential pressure transmitter. As much as the nameplate specs count when deciding how trustworthy a provider is, the guarantee terms and the long-term supply of parts are also very important.
Buying the rosemount 2051CD differential pressure transmitter from an official seller guarantees that the product is real, that the warranty is still valid, and that you can use Emerson's technical support resources. As an official channel partner, Shaanxi Honglixing Electronic Technology Co., Ltd. (HLX) stocks original Emerson instruments and offers low prices for large OEM orders.
Here are some of the main ways that HLX helps OEM clients save money on purchases:
These benefits take into account the practicalities of OEM buying, where project profitability is directly affected by how reliable shipping is, how well the product works, and how much help is provided after installation. If your supply chain isn't solid, it will cost you a lot more in the end than the price savings you got at first.
When OEMs use this Rosemount 2051CD differential pressure transmitter, it makes the process better in a way that can be measured. A properly set-up differential pressure instrument lowers measurement error, which in turn improves the accuracy of flow calculations, the management of inventory, and the performance of safety systems. This device has a SIL 2/3 rating, which means it can be used in safety-instrumented tasks. This lets OEMs make their safety design easier by using the same family of instruments for both the control loop and the safety loop.
Emerson is sure that the device will work well for a long time, which is shown by the five-year guarantee. This lowers the total cost of ownership in real life because there is less need for replacements, calibrations, and unplanned downtime, all of which lead to higher operational efficiency over time. When OEMs are making systems that will last ten years or more, they need a transmitter with a stable product lifecycle, good documentation, and a lot of compatible accessories on the market.
The WirelessHART® feature makes installations ready for the future. As factories move toward IIoT-enabled systems for tracking and planned maintenance, being able to add measurement points without having to set up new cable networks gives OEM system makers a real edge in the market.
The Rosemount 2051CD differential pressure transmitter is a useful mix of accuracy, flexibility, and safety certification. This makes it a good choice for OEM integration in oil and gas, power generation, chemical, and HVAC uses. Its coaxial design, ability to support many protocols, and variety of corrosion-resistant materials give engineers a lot of freedom when making configurations that meet specific process needs. This transmitter meets both short-term performance goals and long-term operating resilience. It is backed by Emerson's global support network and can be bought from approved distributors such as HLX.
4-20 mA HART®, WirelessHART®, FOUNDATION™ Fieldbus, PROFIBUS®, and 1-5 V Low Power HART® can all be used with the transmitter. This range includes most of the industrial control systems that are used today in process automation.
With coaxial technology, you can connect directly to the main flow elements, diaphragm seals, and manifold valves. It gets rid of the need for separate impulse tubing runs, which cuts down on installation time and possible leak spots.
You can choose from 316L stainless steel, Alloy C-276, and tantalum. Each is good for a different type of process media, from general use to very harsh chemical applications.
Yes. It has been certified by a third party as SIL 2/3 according to IEC 61508. You can also get FMEDA data to help with the design paperwork for safety-instrumented systems.
HLX stocks original Rosemount 2051CD differential pressure transmitter units sourced directly through authorized Emerson channels. As a reliable Rosemount 2051CD differential pressure transmitter supplier, we provide competitive OEM pricing, pre-shipment testing, and full after-sales engineering support. Contact our team today at sales01@hlx8.com to request a quote, discuss bulk procurement terms, or get application-specific configuration guidance from our experienced instrumentation engineers.
1. Emerson Process Management. Rosemount 2051 Pressure Transmitter Product Data Sheet. Emerson Electric Co., 2022.
2. International Electrotechnical Commission. IEC 61508: Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems. IEC, 2010.
3. Lipták, Béla G. Instrument Engineers' Handbook: Process Measurement and Analysis, Volume I. CRC Press, 2003.
4. ISA — International Society of Automation. ISA-5.1-2009: Instrumentation Symbols and Identification. ISA, 2009.
5. Emerson Process Management. Rosemount Pressure Transmitters: Engineering and Integration Guide for OEM Applications. Emerson Electric Co., 2021.
6. Battikha, Noel E. The Condensed Handbook of Measurement and Control. ISA Press, 2004.
Our customers’ satisfaction speaks for our quality — contact us to experience the same reliable service.