The Rosemount 3051CD coplanar pressure transmitter does support WirelessHART technology. However, this capability is not built directly into the base unit. The transmitter outputs a standard 4-20 mA HART signal, and WirelessHART connectivity is achieved by pairing it with a compatible wireless adapter, such as the Emerson Rosemount 775 THUM Wireless Adapter or through integration with a WirelessHART gateway. This approach lets facilities add wireless data access to existing wired installations without replacing the core instrument, making it a practical choice for plants looking to expand remote monitoring without full system overhauls.
Pressure is turned into an electrical signal by the 3051CD's capacitive sensor technology. The detecting diaphragm is reached by pressure going through an isolation diaphragm and the filled fluid. The movement causes a change in capacitance that is proportional to the movement. The electronics then turn this change into a 4-20 mA output or a HART digital signal. This working principle gives very stable measurements and works well for controlling industrial robotics in tough process settings.
If the differential pressure is above 137.89 bar (2,000 psi), the gage pressure is also above 137.89 bar (2,000 psig), and the absolute pressure is above 275.79 bar (4,000 psia). The accuracy is ±0.04% of the span. 316L stainless steel, Alloy C-276, Alloy 400, tantalum, and gold-plated materials can all be wetted. These materials can handle a wide range of fluids, from normal process fluids to very corrosive media. With a limited warranty that lasts for five years and verified stability for twelve years, the gadget requires less calibration and costs less over its lifetime.
All of the connection points on the coplanar platform are on the same plane. This makes it up to 70% less likely that there will be leaks than with traditional installations. Direct connection to manifolds gets rid of the need for complicated impulse pipes, speeds up installation, and makes it easier to do upkeep. This design directly leads to fewer unplanned shutdowns and lower upkeep labor costs over the instrument's service life for sites in the oil, chemical processing, pharmaceuticals, and power generation industries.
A self-organizing mesh network protocol called WirelessHART is defined by IEC 62591. It is based on the HART communication standard. It lets process data be sent from field devices to control rooms without having to run wires. Plants that use WirelessHART say that it lowers the cost of installation and makes it easier to access process data from places where running cables would be unsafe or impractical. The algorithm works in the 2.4 GHz band and uses frequency hopping and 128-bit AES encryption to keep data safe and reliable.
The 3051CD emitter sends out a signal that is compatible with HART, which makes wireless adaptation easy. The device can join a WirelessHART network without having to buy any new hardware, as long as the Emerson Rosemount 775 THUM Wireless Adapter is connected to the Rosemount 3051CD coplanar pressure transmitter's terminal block. The adapter gets its power from the loop and doesn't need an outside power source. It can talk to a Smart Wireless Gateway like the Emerson 1420. The data is then sent over Ethernet or Modbus to the plant's DCS or historian via this link.
Emerson's Smart Wireless Gateway 1420 can connect up to 100 field devices and can reach up to 250 meters per hop. It can also connect to multiple gateways, which lets the network reach across large facilities. Emerson also has the Rosemount 3051S, which has a WirelessHART choice built right into the transmitter body for new installs that are going to be wireless from the start. To avoid extra steps for integration, procurement teams should make sure that the approach they choose works with the site's current infrastructure before placing an order.
It is the same capacitive sensing platform and ±0.04% accuracy for both the 3051C and the 3051CD. The main difference is in how the mounts are set up. The 3051C has a standard two-valve manifold setup, but the 3051CD's coplanar design cuts down on leak points and makes the planning of the pipes easier. With the THUM connector, both types can connect to WirelessHART. The 3051CD is often the best choice for facilities that already use a lot of Emerson hardware because it is safer and less likely to leak.
The EJA110E from Yokogawa is a well-known differential pressure transmitter that is small and accurate to within 0.04%. The YTA510, Yokogawa's own wireless adapter, lets it work with WirelessHART. The EJA110E is known for working well in places where there is a lot of static electricity. The 3051CD is popular with buyers who value predictive maintenance data and deep interaction with Emerson DeltaV or Fisher valve positioners. It comes in a bigger range of materials and is part of the Emerson ecosystem of diagnostics tools.
The Endress+Hauser Deltabar PMD75 can measure differential pressure and is set up to work with both WirelessHART and Bluetooth. Its ceramic sensor option is resistant to chemicals and doesn't need an isolation diaphragm fluid. The 3051CD counters have a wider range of pressures that they can measure and a more established world service network. OEM sellers and big plant owners often choose Emerson's 3051CD as their main Rosemount 3051CD coplanar pressure transmitter standard because it has a 150:1 range-down ratio and has been stable for a long time.
If you buy from an official Emerson Rosemount dealer, you can be sure that you are getting a real product and that the factory guarantee will cover it. Full traceability documentation, certificates of conformance, and access to Emerson's technical support resources are all provided through authorized channels. Shaanxi Honglixing Electronic Technology Co., Ltd. (HLX) is an official Emerson Rosemount distributor. They offer original, checked instruments with fast lead times to customers in the oil, chemical, and power generation industries.
Standard 3051CD units usually ship within two to four weeks from authorized stock. When supplies are tight, bulk procurement agreements for OEM projects or plant-wide standardization programs can lower the cost per unit and make sure that the right people get the right supplies at the right time. HLX offers customized quote services to help customers choose the right pressure range code, output protocol, process link, and material choices before they buy. If you get the model code right from the start, you won't have to pay for expensive refunds or field changes.
The 3051CD comes with a limited warranty from the manufacturer that lasts for five years. The technical engineering and after-sales teams at HLX have worked in the field for more than ten years and can help with configuration, on-site commissioning, and warranty claims. For plants that run continuous processes, knowing that there is a responsive support channel nearby makes a big difference in lowering the risk of downtime when an instrument needs to be serviced or replaced.
A HART communicator or AMS Device Manager software can be used to zero and span calibrate the 3051CD. Put a known reference pressure on the transmitter's test terminals and connect the communicator to it. Then, use the lower range value and higher range value orders to set the span. In WirelessHART mode, configuration orders are also sent over the wireless network. This lets changes be made to the calibration from a safe location without sending a worker into a dangerous area. Emerson says that calibration should be checked at least once a year in normal working conditions.
Problems with weak signals are the most common issue in spaces that can connect wirelessly. It generally happens when there are metal objects in the way between the emitter and the closest mesh node. Adding a repeater node or moving the gateway antenna is usually enough to fix this. If the THUM adapter can't connect to the network, make sure that the join key you put in the adapter matches the key you set up in the gateway. When you look at the network map in AMS Wireless Configurator, you can quickly see how good the signal paths are for all of the devices that are linked.
The 3051CD should be properly maintained by checking the isolation diaphragm for signs of corrosion or buildup on a regular basis, using the transmitter's built-in plugged line diagnostic to check impulse line connections for plugging, and going over loop integrity diagnostic alerts from the control system. In wireless deployments, the battery life of any adapters that are charged from the outside should also be checked during regular maintenance checks. These steps, along with the transmitter's built-in diagnostics, make sure that the device works correctly between official calibration periods.
The Rosemount 3051cd coplanar pressure transmitter is a reliable differential pressure sensor that can be used with WirelessHART by using the Emerson THUM adapter and Smart Wireless Gateway. It is a good choice for chemical, oil, and power plants because of its coplanar shape, wide range of materials, and 150:1 range-down ratio. To get warranty coverage and make sure the products are real, procurement teams should only buy from authorized distributors. With the right gateway setup and regular maintenance, the 3051CD gives you accurate pressure data that you can access wirelessly in a lot of different tough process conditions.
Yes. The Emerson Rosemount 775 THUM Wireless Adapter plugs into the transmitter's terminal block and gets its power from the 4-20 mA loop that is already there. There are no changes that need to be made to the transmitter housing or the process connection. This means that fixed teams can get wireless upgrades without having to get new tools.
With the THUM connector, both types can connect to WirelessHART. The 3051CD has a coplanar mounting base that cuts down on leak points and makes it easier to connect the manifold. The 3051C has a standard way of attaching.
Yes. The transmitter has been approved for use in dangerous places, such as ATEX, IECEx, and FM/CSA certifications for Zone 1, Zone 2, Division 1, and Division 2 installations. These approvals work for both wired and wireless setups as long as an approved device and gateway are used together.
A WirelessHART device's update rate can be set to anywhere from once per second to once per minute, depending on the needs of the application. For most plant tracking apps, faster update rates are fine as long as they don't use too much network bandwidth.
HLX is a licensed Emerson Rosemount agency that has worked with oil, chemical, and power generation projects for more than ten years to provide original instruments. As a reputable Rosemount 3051cd coplanar pressure transmitter provider, we offer original goods at low prices and with quick lead times. Email our team at sales01@hlx8.com to get a custom quote or technical advice for your next procurement project.
1. Emerson Process Management. Rosemount 3051 Pressure Transmitter Product Data Sheet. Emerson Electric Co., 2022.
2. International Electrotechnical Commission. IEC 62591: Industrial Communication Networks – WirelessHART Communication Standard. IEC, 2016.
3. International Electrotechnical Commission. IEC 61508: Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems. IEC, 2010.
4. HART Communication Foundation. HART Field Communication Protocol Specification. FieldComm Group, 2020.
5. Emerson Process Management. Smart Wireless Gateway 1420 Product Manual. Emerson Electric Co., 2021.
6. FieldComm Group. WirelessHART Technology Overview and Application Guide. FieldComm Group, 2019.
Our customers’ satisfaction speaks for our quality — contact us to experience the same reliable service.